How To Repair Dodge Caravan

Download Article

Download Commodity

Replace the tail light on your Dodge Thou Caravan with new and efficient Dodge motorcar Taillight. Auto tail lights are of import function of the vehicle's safety system, and fully operational tail lights are the law. There are lots of items in various types and designs to choose from like Contrivance taillights so you lot volition surely get the production that will arrange your personal choice.

1. one

   Open up your tailgate.

2. 2

   Look for two (ii) circular flat black discs about the size of a dime (simply thicker) on the within of the body (between the red lens and the weather striping). ^[i]

3. 3

   Using a pair of pliers, pull out each of these ii discs. ^[ii]

   • Annotation they are in tight and may require a fair flake of forcefulness to remove.

4. 4

   Brand sure the inner part of the disc as well comes out. There are 2 parts to this system, a grommet and a plug:

   1. Push button the plug backwards through the grommet.
      • The grommet fits into the bodily pigsty in the body, and is spread by the plug, the pressure holding them in place.
   2. Carefully remove both grommet and plug.
      • The lens assembly will fall away from the vehicle when you pull out the second grommet and so be careful.

5. 5

   Annotation the wiring harness that connects to a plug inside. Beside that plug are two holders for the actual lamps. It is not necessary to disconnect the wiring harness to replace only a lamp rather than the assembly. To disconnect the wiring harness slide red tab lock out and squeeze grey tab to undo and divide connectors.

6. 6

   Remove the holder past pressing the sides inwards and pulling. The light socket should come up out.^[iii]

7. 7

   Supersede with the right lamp (The 2004 Dodge Caravan uses a 3057 lamp that has metal rim and a flat plastic base of operations with ii wires running over it. Check your manual for your lamp.)

   1. Pull on the old lamp to remove it from the holder.
   2. Press the new lamp firmly into the holder.

8. 8

   Replace lamp holder in the Taillight associates. Make sure the plastic tab locks engage securely. Make clean away any interfering clay every bit required.^[4]

9. nine

   Reattach the vehicle wiring harness to the Taillight associates if necessary.

   1. Wipe the outer vanquish of both connectors to remove dirt and grit. Cheque the vehicle harness connector tab and red lock for grit and clean as necessary.
   2. Position ruby-red connector lock disengaged - apartment side pushed out, prongs pushed in.
   3. Press connector shells together slowly and firmly until grey tab engages. A faint click sound is unremarkably audible.
   4. Press red connector lock tab in to engage tab lock.

10. 10

    Replace Taillight assembly in vehicle.

    1. Guide Taillight forward into recess pushing vehicle wiring harness back into crenel behind fender. A trailer lighting harness, if present, is attached between the vehicle wiring harness and the Taillight associates and should be positioned with the foam wrapped connector stack in the cavity backside the fender and the trailer lighting harness exiting the Taillight recess continuing downwardly behind the bumper cover.
    2. Appoint Taillight assembly tab in vehicle recess.
    3. Gently press Taillight assembly into final position. Avert wiggling associates into position as this may break the mounting tab.
    4. Press both plastic retaining posts into Taillight assembly to lock it in place. If the posts were removed from the vehicle, identify the outer grommet into the hole so put the mail into the grommet and press it in until information technology engages the Taillight assembly.

11. xi

    Check the lite with the aide of an assistant:

    • Printing the brake pedal.
    • Plow on the indicate light.
    • Turn on the running lights.
    • Put the vehicle in contrary.

12. 12

    Make sure it lights earlier replacing the lens assembly.

    Advertisement

1. one

   Slide the front edge of the assembly into the guide.

2. 2

   Printing the back end into identify.

3. 3

   Hold it in place and press the inner part of the grommet into the pigsty.

4. iv

   Button the outer (central) part of the grommet into the inner part.

   • This takes a fair scrap of force per unit area, and you must make certain that the pigsty in the inner grommet lines upwards with the outer plug grommet.

5. 5

   Bank check the lights and you're done.

   Advertizement

Add New Question

• Question

  What if I suspension the tab while replacing a tail low-cal?

  

  Y'all will accept to replace the part the tab broke on. Tabs can be glued, but they will usually not last.

Ask a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Advert

Video

• Some bulbs can be removed by pulling. Other types need rotation of the seedling socket in a counterclockwise direction, while others have sockets and notches which need screwdrivers and other tools.

• To have brighter auto tail lights, alter the stock single-filament Taillight bulbs with other seedling high powered types. Smaller types tin can protect plastic lenses from added heat.

Advertisement

• Requite yourself plenty of fourth dimension to brainstorm and complete this job in a single session. The last thing you want is to lose a small component.

• Disconnect the battery before working with electrical connections.^[v]

• Do not use acetone or other solvents to clean plastic parts.

Advertising

About This Commodity

Thanks to all authors for creating a page that has been read 102,859 times.

Did this article help you?

Source: https://www.wikihow.com/Replace-a-Tail-Light-on-a-Dodge-Grand-Caravan

Posted by: newbycantences.blogspot.com

Share this post